- Home
- Applications
Refine by
Xprt Product Applications For The Mining Industry
296 applications found
Application example in mining: Sorting applications for hard to extract minerals are adding value to mining operations. With reliable and robust EVK technology, minerals can be analysed, and cameras calibrated, to precisely deliver the high performance required. Our expertise in mining is an essential tool in extracting the full potential of mining ...
ByEVK DI Kerschhaggl GmbH based in Raaba/Graz, AUSTRIA
Every pit lake is unique in terms of hydrogeology and geochemistry, and methods to monitor for environmental impact vary. But in every case, it’s important to have accurate groundwater and surface water data for effective mine water ...
ByIn-Situ Environmental based in Fort Collins, COLORADO (USA)
SETCO solid mining tires are most advantageous in the mining industry. SETCO solid mining tires do not suffer from premature failures, which have plagued the mining industry in the past. The solid rubber tire is under no pressure whatsoever and therefore in no danger of the tire exploding or blowing out at the slightest puncture. If SETCO solid mining tires do cut or chunk, it simply means you’ve added more traction to the tread. SETCO solid mining tires also will not absorb moisture or deteriorate when ...
BySetco Solid Tire & Rim based in Idabel, OKLAHOMA (USA)
A great deal of waste water is discharged in the process of mining, but 40% of mine areas in China are seriously short of water, which has restricted the development of mining enterprises' production. Mining area in the northwest is mostly in mountainous areas, and water resources are scarcer. Surface water is mainly intermittent river. The dilution capacity of flow is poor all year round. The wastewater discharged into the river causes pollution. A large amount of mine waste water from mining enterprises is ...
ByShanghai Techase Environment Protection Co., Ltd based in , CHINA
Strength, toughness, machinability, and economy are the reasons for the many uses of forgings in off-highway and heavy construction equipment, mining equipment, and material handling applications. In addition to engine and transmission parts, forgings are also used for various gears, drills, sprockets, levers, shafts, spindles, joints, hubs, rollers, clamps, shaft beams, bearing seats, and connecting ...
ByZhejiang Cxin Forging Technology Co., Ltd. based in SuiChang, CHINA
The quarrying industry requires durable, high-performance equipment that can stand years of wear in rugged environments. High quality, high performance centrifugal and submersible slurry pumps are at the core of our product range, which has been hand selected to offer products that are consistently reliable in environments where water and solids need to be removed or ...
ByIntrax Global based in Chesterfield, UNITED KINGDOM
HIMOLOC technology allows us to develop specific polymers for mining and dust control offering advantages compared to the usual technologies on the market. With the clear main objective of offering highly effective and environmentally sustainable products, Derypol has several ranges of products used in the Mining and Dust Control sector. These polymers offer a profitable, differential and effective solution for those processes where the solid / liquid separation operation is essential such as Concentration, ...
ByDerypol, S.A. based in Barcelona, SPAIN
Mining operation facilities alter the natural environment and require monitoring to understand this impact. Mines in the north often operate on the assumption that permafrost and frozen waste facilities will remain in this state but changing climate conditions challenge that assumption. Mines operating all over the world manage massive waste facilities where understanding the internal characteristics is vital for maintaining safe ...
Bybeadedstream inc. based in Anchorage, ALASKA (USA)
Mining processes can be water intensive. Unfortunately many mines are located in areas of high water scarcity. Chile, Australia and Namibia are a few of the countries that have turned to desalination to enable the production of high value metals and minerals. Having a secure alternative water source is not only necessary to sustain operations but is often a prerequisite for planning ...
ByTriton Water Technologies, S.L. based in Arrecife - Las Palmas, SPAIN
Serious incidents adversely affecting employees’ well-being may incur significant expenses and reputational damage, ranging from AUD $20M in employee compensation and additional associated operational cost. In 2012-13, work-related injuries in Australia cost the industry AUD$61.8B, equitable to more than 5% of Australia’s GDP. In 2019 Cognitive Fatigue was cited as the underlying cause of 144 fatalities, where more than 30%, were machinery operators and drivers(2). In most situations, identification of ...
ByCanaria Technologies based in Brisbane CBD, AUSTRALIA
Designed to empower process engineers, the Red Meter delivers key measurement data which can be used to optimize processes in real time. With little maintenance required and a simple in-line installation procedure, upgrading to the Red Meter is ...
ByRed Meters based in Orlando, FLORIDA (USA)
Powering a mine is costly and difficult. Depending on aging grids to supply your power is unreliable, using diesel generators is inefficient, and most renewable power options are way to cumbersome and expensive. ClearPower and mining are a perfect fit. Your mine uses and returns millions of gallons of water back to its source every day. The water you are returning down hundreds of feet could easily be converted into an inexpensive sustainable source of power. The ClearPower Industrial Turbine Generator “M ...
ByClear Power North America, LLC. based in Castle Rock, COLORADO (USA)
The extraction of essential nutrients such as phosphate, potassium, and other minerals from the earth is a critical process conducted by mining operations worldwide. These activities are fundamentally important for providing key ingredients for soil enrichment, food production, animal feed, and consumer products. The role of these minerals extends from enhancing soil fertility to supporting the global food supply chain and consumer products, making them an indispensable link in both the agricultural and industrial ...
ByAlsys International based in Sassenheim, NETHERLANDS
The mining industry relies on water. Water is used extensively in mining and mineral processing and refining. Tailings dams are used to store byproducts of mining operations after separating ore. Tailings dams provide optimal conditions for algae to bloom with their stagnant and nutrient-rich water, causing filter clogging and foul odors. Algae can also interrupt mining operations by clogging filters. Resulting in increased chemical usage and ...
ByLG Sonic B.V. based in Zoetermeer, NETHERLANDS
Reducing dissolved metal concentrations in mining-influenced water (MIW) is essential for cleanup and management strategies at both active and abandoned mine sites. Aeration introduces oxygen into the MIW, enhancing the dissolved oxygen levels, with the purpose of oxidizing dissolved metal species into less soluble forms. For example, for the removal of Fe, aeration is needed to oxidize the free molecules of Fe into FeO2. FeO2 flocs together, and can then be screened out. A similar process can be done for removal ...
ByMapal Aeration Solutions based in Yagur, ISRAEL
Our innovative solution for environmental management in mining that allows you to optimize your planning, comply with regulatory standards and achieve your production goals. Maximize efficiency and operate with confidence in your ...
ByAmbiensQ Suite based in Bucaramanga, COLOMBIA
DENCELL MUD-4 and MUD-5 is a Slurry Density Meter for industrial automation of processing equipment, such as ball mills, hydrocyclones, slurry splitters, classifiers, floatation cells, filter presses and thickeners. It can be connected to pipelines and open chutes irrespective of their fill ...
ByDENCELL based in Ottawa, ALBERTA (CANADA)
The demanding mining industry requires a lot from its progressing cavity pumps. A large range of media needs to be pumped with a variety of viscosity levels that can be highly abrasive. Media pumped include mineral slurries, thickened sludges, waste water, and drilling muds. Moyno progressing cavity pumps meet the demands of the mining ...
ByMoyno, Inc. based in Springfield, OHIO (USA)
The management of noise from mining operations is recognized as a fundamental responsibility of the mining industry. Implementing a noise management system that includes noise surveys, day and night noise mitigation, and some level of noise monitoring is a primary function that is required to meet environmental impact standards in most ...
ByLarson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA)
ByenVirSys LLC. based in Littleton, COLORADO (USA)